Gaskets for the housing of the oil filter? If your engine is the engine of your vehicle engine oil is blood. The healthier the blood is, the healthier your heart. So long as the oil stays in good condition the engine will remain competent. However, it is not difficult for oil in engines to become dirty.
In the end, they’re not just lubricating your engine, but also cleaning and protecting it. Anything left after combustion is carried away by the engine oil. When you consider that your engine produces more than 1000 combustions per minute and that your engine oil must be as strong as toothpaste. However, they will remain free of contaminants for more than thirty thousand miles.
It is because of a component known as an oil filter. Filters in oil are regularly filtered by engine oil when it travels through the engine. It is because of oil filters that you’re capable of achieving the same mileage prior to the need for an oil change. Because oil filters are used constantly, they can last as far as 5000-7000 miles.
This is the reason they are designed so that they are simple to access and are able to be changed on the fly. It is all because of Oil Filter Housing.
What exactly is Oil Filter Housing?
The housing of the oil filter is a container used to house oil filters in an engine’s engine bay. It is a device that is used to connect the oil filter to the engine by locking it to a specific location. Simply put the housing of the oil filter provides an ideal location that allows the oil filter perform its work.
It’s also close to the engine cover , which makes it easy to reach when it is needed. Why should I make this sound important?
Back in the 60s, if you needed to change your oil filters , you had to remove the entire canister and then change it after replacing an O-ring, and including extra oil into the canister.
Comparing that to today, your home is not only able to make filters accessible, but are also practical and efficient, and saves you money on labor and ensures secure filtration with no leaks.
They are extremely strong and, since they are typically within of the engine, they’re very sturdy. This is the reason why you usually experience leaks because of bad engine oil or blocked filters. But there’s one thing that can make the oil filter housing vulnerable, and that is gaskets.
Visit this site for a 2.0 TDI oil filter housing.
Why do we need a Gasket?
A gasket is a seal used to seal the filter, and to prevent spillage of oil. Both internal and external kinds of oil filters that are attached in the engine compartment, a seal will be essential to seal the filter completely. Without gaskets, and unless they are secured with adhesives, frequent leaks of oil is a regular occurrence and the process of changing oil filters will take a long time.
To stop this, we created gaskets. But, over time the gasket becomes brittle and begins to show cracks all over it. This can lead to tiny leaks, and if it is not addressed during regular maintenance, it could easily result in an enormous engine oil spillage.
So how Do You Know You Have A Bad Gasket?
How do you spot Bad Oil Filter Housing Gasket?
If you are trying to determine the signs of a condition, you look at the signs. Similar to when you want to determine if you have a damaged gaskets for the housing of your oil filter You look for oil leaks. Leaks in oil are something which isn’t often seen particularly in modern automobiles. If you notice oil spots under your vehicle after having it parked in one location for at minimum 2 or 3 hours, it’s the sign of a gasket that is not working properly.
Another method to identify it is by looking at the engine oil indicators. The indicator on the engine oil is designed to alert you of a problem with your engine oil. It does this by keeping track of the oil pressure or the volume.
If you have a gasket that is not working, you’ll be experiencing leaks in your oil. The leaks can result in lower oil volume or changes in pressure within the engine i.e. “Lights on”. It is recommended to have your engine examined immediately.
However, is it really necessary to solve the problem immediately?
Gasket for the Oil Filter Housing Replacement
Leakage within your oil filter housing isn’t something to be considered lightly. We’ve already learned that it is the link between the oil filter to the engine oil. If your filter isn’t functioning correctly your engine oil is likely to be damaged, resulting in a performance drop.
Leakage inside your housing is an increase in oil levels. This puts more stress of your motor, leading it to overheat and leave gaps everywhere, resulting in poor combustion. Overall you’re looking at an extremely unstable engine that could sustain lasting damage in any moment. Therefore, unless you’re very wealthy, managing the leak must be the top priority.
How to replace gaskets in the housing of the oil filter?
The replacement of the gasket in the housing for your oil filter is a quick and easy procedure, but you may need to take your hands “wet”. It is necessary to remove the housing for your oil filter, then replace your gasket before screwing it back into place.
To begin, remove the bonnet and find the housing for your oil filter. It should be near the cover for your engine.
After you’ve found the gasket, you can remove the cap (cap) to the point that it’s loose enough to lift by hand. Doing this will assist in moving all the oil back into the engine and you won’t make a mess while taking off the housing for the oil filter.
After 20 seconds, begin dislodging the bolts connecting the oil filter housing with the motor. In most cases, you will find three bolts with different dimensions. Find the bolts and remove each one at a time. Be sure to take note of which bolts go into the socket.
After you have removed all the bolts lay some clean clothes underneath in the area around and under the housing. Remove the two hoses connecting to the other side and slowly take the housing of the oil filter away.
When you pull the housing away you’ll be aware of the gasket underneath it. It’s now time to pull the gasket off. Find a pointy tool and dig one side of the hole to pull it out of the seal.
Once the gasket has been removed, remove the gasket by wiping it with a cloth. The same procedure is applied to the other component that is that is connected to engine.
It’s now time to install the gasket that you bought. Unwrap the gasket to match the sides, and it should fit in.
Once the gasket has been replaced, put the house for the oil filter back into place. Attach the two hoses back together and close the cap(lid) of the housing housing of the filter. Make sure to add coolant and oil since you may lose some in the process.
Then, start your engine for the final test and you’ll be in good condition.